New PressRelease information at Medical Device Network New and updated information from PressRelease listed on www.medicaldevice-network.com http://www.medicaldevice-network.com/ en-us http://www.medicaldevice-network.com/ New PressRelease information at Medical Device Network http://www.medicaldevice-network.com/content/images/logo_big.gif Cendres+Métaux's Three New Divisions Start to get their Own Identity. http://www.medicaldevice-network.com/contractors/nanotechnology/cendres-metaux/presscendresmtauxs-three-new-divisions-own-identity.html http://www.medicaldevice-network.com/contractors/nanotechnology/cendres-metaux/presscendresmtauxs-three-new-divisions-own-identity.html After creation of first two divisions CM Medtech and CM Luxury+Industry at end of 2015, Cendres+Métaux made the acquisition of Momo Plus AG in July 2016. This was integrated and renamed in CM Microtech. Wed, 15 Feb 2017 15:41:00 GMT NSF International Partner with IDMA to Provide Quality management Courses to Pharmaceutical Industry http://www.medicaldevice-network.com/contractors/consultancy_services/nsf-health-science-consulting/pressnsf-international-idma-pqm.html http://www.medicaldevice-network.com/contractors/consultancy_services/nsf-health-science-consulting/pressnsf-international-idma-pqm.html NSF International is partnering with the Indian Drug Manufacturers' Association (IDMA) to offer a customised, five-module pharmaceutical quality management (PQM) education programme in Bangalore, India. Tue, 07 Feb 2017 16:54:00 GMT cab Technology's General Manager Discusses Importance of Intelligent Devices http://www.medicaldevice-network.com/contractors/packaging/cab-technology-medical/pressimportance-intelligent-devices.html http://www.medicaldevice-network.com/contractors/packaging/cab-technology-medical/pressimportance-intelligent-devices.html Long before advanced manufacturing and the Internet of Things became evident, cab devices did far more than just printing on a label. Tue, 07 Feb 2017 09:47:00 GMT AL428FDA Two-Part Epoxy Resin http://www.medicaldevice-network.com/contractors/adhesives/alfa-international/pressal428fda-two-part-epoxy-resin.html http://www.medicaldevice-network.com/contractors/adhesives/alfa-international/pressal428fda-two-part-epoxy-resin.html AL428FDA is a two-part, heat-resistant and low exothermic epoxy adhesive formulation. It is a solid epoxy adhesive, with superior chemical resistance and shear strength. Sat, 04 Feb 2017 00:00:00 GMT Manufacturer Mikron Automation Expands US Headquarters in Metro Denver to Meet Rapid Growth http://www.medicaldevice-network.com/contractors/manufacturing/mikron-automation-solutions/pressmikron-automation-expands-headquarters.html http://www.medicaldevice-network.com/contractors/manufacturing/mikron-automation-solutions/pressmikron-automation-expands-headquarters.html Mikron Automation and Denver-based Confluent Development have announced the expansion of Mikron Automation's US headquarters in Arapahoe County's Dove Valley Business Park. Fri, 03 Feb 2017 09:53:00 GMT Accumold to Exhibit at MD&M West http://www.medicaldevice-network.com/contractors/contract-services/accumold/pressaccumold-exhibit-mdm-west.html http://www.medicaldevice-network.com/contractors/contract-services/accumold/pressaccumold-exhibit-mdm-west.html Accumold® has announced it will be showcasing its precision micromolded plastic component solutions at MD&M West. Thu, 02 Feb 2017 15:28:00 GMT New Global Vice-President of NSF Pharma Biotech and Medical Devices Announced http://www.medicaldevice-network.com/contractors/consultancy_services/nsf-health-science-consulting/pressnsf-global-vp-pharma-biotech.html http://www.medicaldevice-network.com/contractors/consultancy_services/nsf-health-science-consulting/pressnsf-global-vp-pharma-biotech.html NSF International has announced the appointment of a new global vice-president for NSF Pharma Biotech and Medical Devices following Bob Pietrowski's retirement. Mon, 30 Jan 2017 14:42:00 GMT AL420FDA Two-Part Epoxy Resin http://www.medicaldevice-network.com/contractors/adhesives/alfa-international/pressal420fda-two-part-epoxy-resin.html http://www.medicaldevice-network.com/contractors/adhesives/alfa-international/pressal420fda-two-part-epoxy-resin.html AL420FDA is a two-part, heat-resistant and low exothermic epoxy adhesive formulation. It is a solid epoxy adhesive, with superior chemical resistance and shear strength. Tue, 24 Jan 2017 00:00:00 GMT Two-Part Low-Exothermic Epoxy Adhesive Provides Superior Chemical Resistance http://www.medicaldevice-network.com/contractors/adhesives/alfa-international/pressepoxy-adhesive-superior-chemical-resistance.html http://www.medicaldevice-network.com/contractors/adhesives/alfa-international/pressepoxy-adhesive-superior-chemical-resistance.html AL419FDA is a two-part, heat-resistant, and low-exothermic epoxy adhesive formulation. It has superior chemical resistance and shear strength and also contains a thixotrophic agent, which impedes thinning out of the material during heat cure when pro… Tue, 10 Jan 2017 00:00:00 GMT Greiner Bio-One Adds New Safety Hyperdermic Needle to Range http://www.medicaldevice-network.com/contractors/biotechnology/greiner-bio-one-preanalytics/pressnew-safety-hyperdermic-needle.html http://www.medicaldevice-network.com/contractors/biotechnology/greiner-bio-one-preanalytics/pressnew-safety-hyperdermic-needle.html Greiner Bio-one has announced it has added a new product to its range of safety solutions in an attempt to eliminate the risks of needlestick injuries. Mon, 09 Jan 2017 16:02:00 GMT Small Tubes, Great Impact http://www.medicaldevice-network.com/contractors/biotechnology/greiner-bio-one-preanalytics/presssmall-tubes-great-impact.html http://www.medicaldevice-network.com/contractors/biotechnology/greiner-bio-one-preanalytics/presssmall-tubes-great-impact.html In some situations, only low quantities of blood can be taken in order to ensure patients are as safe and comfortable as possible. Fri, 06 Jan 2017 09:36:00 GMT maxon motor Presents New Speed Motors and Controllers http://www.medicaldevice-network.com/contractors/mechanics/maxonmotor/pressmaxon-motor-presents-new-speed-motors-and-controllers.html http://www.medicaldevice-network.com/contractors/mechanics/maxonmotor/pressmaxon-motor-presents-new-speed-motors-and-controllers.html Swiss drive specialist maxon motor has introduced two additional brushless direct current (DC) motors in its recently launched ECX series product line. Wed, 21 Dec 2016 16:14:00 GMT Greiner Bio-One Finds Optimum Solution for Reliable Diagnosis of Diabetes http://www.medicaldevice-network.com/contractors/biotechnology/greiner-bio-one-preanalytics/pressoptimum-solution-reliable-diagnosis-diabetes.html http://www.medicaldevice-network.com/contractors/biotechnology/greiner-bio-one-preanalytics/pressoptimum-solution-reliable-diagnosis-diabetes.html Greiner Bio-One has found the optimum solution for reliable diagnosis of diabetes in the form of the new VACUETTE® FC Mix tube. Mon, 19 Dec 2016 09:06:00 GMT IONISOS Acquires Leoni Studer Hard http://www.medicaldevice-network.com/contractors/sterilisation/ionisos/pressionisos-acquires-leoni-studer-hard.html http://www.medicaldevice-network.com/contractors/sterilisation/ionisos/pressionisos-acquires-leoni-studer-hard.html Provider of cold sterilisation services in France and Spain IONISOS has announced it has completed the acquisition of Leoni Studer Hard from Leoni Group. Thu, 15 Dec 2016 10:22:00 GMT Safe Microcontroller Programming Practices http://www.medicaldevice-network.com/contractors/manufacturing-software/konplan/pressmicrocontroller-programming-practices.html http://www.medicaldevice-network.com/contractors/manufacturing-software/konplan/pressmicrocontroller-programming-practices.html The Internet of Things (IoT) will eventually connect all of the electronic devices in our lives, providing situation-specific support in day-to-day life. Thu, 08 Dec 2016 08:35:00 GMT Configure High-Speed Drives From Your Sofa http://www.medicaldevice-network.com/contractors/mechanics/maxonmotor/pressconfigure-high-speed-drives-sofa.html http://www.medicaldevice-network.com/contractors/mechanics/maxonmotor/pressconfigure-high-speed-drives-sofa.html The maxon configurator is expanding its offering with a simple, customised, high-end drive, with access at work or at home using maxon motor's online configurator. Wed, 07 Dec 2016 15:29:00 GMT Exploring Possibilities of Measuing Stress Levels Between Burnour and Bore-out http://www.medicaldevice-network.com/contractors/manufacturing-software/konplan/pressexploring-possibilities-measuing-stress-levels-between-burnour-bore-out.html http://www.medicaldevice-network.com/contractors/manufacturing-software/konplan/pressexploring-possibilities-measuing-stress-levels-between-burnour-bore-out.html In order to enhance personal safety and wellbeing, a European research project is exploring the possibilities of measuring specific stress levels between burnout and bore-out. Fri, 02 Dec 2016 12:22:00 GMT Professional Validation Saving You Time and Money http://www.medicaldevice-network.com/contractors/manufacturing-software/konplan/pressprofessional-validation-saving-time-money.html http://www.medicaldevice-network.com/contractors/manufacturing-software/konplan/pressprofessional-validation-saving-time-money.html konplan offers manufacturers and technical providers in the pharmaceutical market practical mechatronic experience and a broad range of skills. The company offers design and development services, as well as product development and automation of small… Fri, 02 Dec 2016 12:17:00 GMT New TMF Series 5 Watt to 30 Watt Power Supply Modules for Medical Applications http://www.medicaldevice-network.com/contractors/electronics/tracoelectronic/pressmodules-medical-applications.html http://www.medicaldevice-network.com/contractors/electronics/tracoelectronic/pressmodules-medical-applications.html The TMF series alternating/direct current (AC/DC) power supply modules are designed and manufactured based on workmanship standards and risk management with the requirements for quality, reliability, and safety of medical equipment compliance. Tue, 29 Nov 2016 14:21:00 GMT Reliable Stabilisation of Urine Samples for Microbiological Diagnosis http://www.medicaldevice-network.com/contractors/biotechnology/greiner-bio-one-preanalytics/pressreliable-stabilisation-urine-samples.html http://www.medicaldevice-network.com/contractors/biotechnology/greiner-bio-one-preanalytics/pressreliable-stabilisation-urine-samples.html An accurate analysis of the bacteria count in urine is extremely important for the diagnosis of urinary tract infections. Tue, 29 Nov 2016 10:42:00 GMT