PEKO Precision Products

Subscribed

You have successfully submitted your enquiry. Someone from our company will respond ASAP

ISO 13485 Contract Manufacturer of Complete Medical Systems & Equipment

PEKO Precision Products works with original equipment manufacturers (OEMs) to produce medical devices, diagnostic instruments and systems.

Address
1400 Emerson Street,
Rochester, NY 14606,
United States of America
Phone

PEKO Precision Products is a vertically integrated contract manufacturer of Class I and Class II medical equipment, diagnostic instruments, and systems.

We help innovators in the medical industry bring groundbreaking developments to market in the areas of diagnostics, chromatography, mass spectrometry, purification, fluids and gas analysis, laboratory automation, molecular spectroscopy, magnetic resonance imaging (MRI), and computerised tomography (CT) imaging, among others.

When start-ups and smaller medical companies outsource their manufacturing to PEKO, the investors and stakeholders of these companies can rest assured that we have decades of experience to back their success. All our customers, including those in the medical industry, retain full ownership of their design’s intellectual property (IP) and this proprietary information is protected through secured assembly areas, cybersecurity protocols, and other precautions.

Qualified workforce for manufacturing operations

Because of the complexity of medical technology, PEKO Precision Products has established a training and competency review programme for its employees. The purpose of this programme is to ensure that employees are properly educated and trained in manufacturing medical products.

PEKO Precision Products manufactures Class I and Class II medical equipment, diagnostic instruments and systems.
We work with clients in a variety of medical sectors, including radio oncology, imaging and diagnostics.
We offer solutions for magnetic resonance imaging (MRI) and computerised tomography (CT) imaging, among other areas.
Our engineers use lean manufacturing practices for continuous production improvement.
Our product development team is skilled in mechanical engineering, electrical engineering and design.
PEKO Precision Products has been certified to ISO 13485 specifications since 2009.
Our project management team is tailored to high-volume production requirements or traditional ‘one-of-a-kind' systems.
We offer medical contract manufacturing of disinfecting equipment.
We use robust methods to provide quality at all stages of the development process.
All our projects are carried out in line with current good manufacturing practice (cGMP) guidelines.

From this information, our management team can keep a matrix of qualified employees and the operations they are authorised to perform, allowing only the most qualified engineers and machinists to perform medical manufacturing processes and activities. The matrix is periodically reviewed so that management can identify opportunities for employees to learn new techniques and cross-train on multiple product lines.

In addition, PEKO’s Six Sigma Black Belts routinely use lean manufacturing practices to promote continuous improvement initiatives.

Regulatory compliance and quality assurance

PEKO Precision Products understands the need to introduce medical products that will perform as intended and are reliable and safe choices for the community they serve. Therefore, we are committed to providing customers with the highest-quality products possible.

The foundation of this commitment is reinforced by our continued implementation of ISO 13485 and our ability to understand and adhere to the applicable regulatory requirements. PEKO has been a proud ISO 13485-certified contract manufacturing partner for medical solutions since 2009.

Medical original equipment manufacturers (OEMs) who work with PEKO will have access to clear regulatory documentation that they can review at any time. Any medical project we work on is carried out with special attention to detail to ensure a high-quality product.

Current good manufacturing practice (cGMP) process validation

In addition to being ISO 13485-certified, PEKO Precision Products also complies with the US Food and Drug Administration’s (FDA) Code of Federal Regulations (CFR 21) and current good manufacturing practices (cGMP). These include installation, operational and performance qualifications.

We have processes in place to prove that your device design complies with good manufacturing practice (GMP) and ensure proper set-up, installation, operation, and performance.

We use cGMP to ensure that quality is built into the manufacturing processes of each medical manufacturing project. These practices allow us to control quality assurance and processes to mitigate risks, prevent product failures, and give our customers confidence in our ability to provide quality products.

These procedures are developed by focusing on efficiency, compliance, loss prevention and customer satisfaction to successfully meet our contractual obligations and remain a leader within the manufacturing community.

Medical industry experience

PEKO Precision Products partners with some of the most innovative medical start-ups and OEMs to provide complex solutions in a variety of medical industry sectors, including radio oncology, imaging, diagnostics, pharmaceutical dispensers, medical robots, surgical equipment, and biological storage.

In the past, we have successfully brought various medical technologies to market such as:

  • MRI radiation scanning system
  • Narcotic dispensing machine and inventory management system
  • Physical therapy and rehabilitation technology devices
  • 3D CT scanner and imaging equipment

Why choose PEKO?

PEKO Precision Products differs from traditional contract manufacturing and product development companies in four ways:

  • Our extensive vertical integration allows us to manufacture critical to function components and most of the mechanical parts and subsystems on-site.
  • Our uniquely experienced project management team is tailored to high volume production requirements or traditional ‘one-of-a-kind’ systems.
  • Our product development team includes mechanical and electrical engineering and design capabilities.
  • We have incorporated a robust method of providing quality at the component level, the subsystem assembly and the final integration phases of the equipment build, avoiding costly and time-consuming debug time at start-up and installation.

This strategy provides our customers with comprehensive medical manufacturing solutions.

Our engineering and manufacturing teams can work from customer computer-aided design (CAD) models, detailed drawings, or specifications. All finished builds are assembled, tested, and shipped from our facility in Rochester, New York, US.

White Papers

Press Releases

  • PEKO Implements 5S Lean Manufacturing Methodology

    PEKO to improve workplace efficiency with the adoption of a 5S System, a visually oriented system of cleanliness, organization, and arrangement designed to facilitate greater productivity, safety, and quality.

  • PEKO Announces Strategic Partnership with FORGE to Promote Innovators in the Northeast

    PEKO Precision Products, a leading contract manufacturer of machinery, equipment, and complex electro-mechanical assemblies, is excited to announce a new strategic partnership with FORGE, a nonprofit that helps startups and innovators navigate the journey from physical prototype to commercialization and impact at scale. With nearly nine out of ten startups resulting in failure, this new collaborative partnership could have a profound impact on the region’s startup ecosystem.

  • The Silicon Review Names PEKO Precision Products Among 2021’s Top 30 Most Reputable Companies

    PEKO, a leading contract manufacturer of machinery, equipment, and major assemblies, has been named one of The Silicon Review’s 30 Most Reputable Companies of the Year for 2021. As the only contract manufacturing company on the list, The Silicon Review notes that PEKO earned its spot by standing out from other manufacturers in its ability to engage in accurate and safe manufacturing processes while also addressing a multitude of challenges present in today’s global market. Specifically, the publication points to PEKO’s New Production Introduction engineering group as a major differentiator and asset to customers.

Address
1400 Emerson Street
Rochester, NY 14606
United States of America