Faulhaber 1024 SR series

MICROMO has launched the FAULHABER 1024 SR series, which has a 10mm diameter and represents a new generation of metal brush commutated motors.

In combination with a gearhead, its output torque can achieve 300 mNm, which is twice that of similar products on the market. Thanks to a superior torque-speed ratio (flat slope), this small DC motor can handle varying loads at reduced speed variations. This allows for the smoothest control and operation.

The motor’s performance is achieved with very low noise and vibration levels. A wide range of matching speed and motion controllers, encoders, and gearheads allow for optimal adaption in high-demand applications, such as portable devices and optical systems.

The huge improvement in power and torque achieved by the 1024 SR series is based on a redesign of nearly all of the motor’s elements, including a new coil, commutation system, and magnet. This results in a significantly wider speed range under load, delivering a continuous torque of 1.5 mNm at 7500 rpm, and exhibiting an output power above 3W. The voltage can be chosen between 6V and 12V.

A uniquely wide range of combination elements helps to transform the motor’s power into high-end performance. It can be joined with either a magnetic or optical encoder when electromagnetic interference has to be excluded.

Another unique feature is the length of the encoder-motor-gearhead combination, which can remain below 51 mm in a 4-stage reduction configuration. The optional zero-backlash spur gearhead eliminates rotating play and grants high accuracy at a competitive price. In addition, the optional combination with a 12/4 planetary delivers the highest power output levels available with motors of this class.

The 1024 SR series provides extended lifetime by integrating spark suppression circuitry that minimises the degrading effect on brushes and the collector. The resulting clean commutation signal also enhances the accuracy of motor control.

This motor is ideal for high-demand applications, and its ability to offer high performance with small dimensions and low weight make it a good choice for all portable devices. Its low vibration levels enable its use in high-accuracy applications, such as in optical equipment or high precision tools.

An optional ball bearing version makes it also suitable for applications with radial loads. The motor is also available with a second shaft end, in a vacuum, and in an extended temperature range version (-30 to + 125°C).